Surface treatments
Industrial wet painting Abrasive blasting Metallizing / thermal sprayingProduction operations
Production operations Industrial adhesive bonding WeldingTechnologies and processes
Send us a part, drawing or technical specification. We will help verify whether a separate technology makes sense, or a follow-on process from surface preparation through a protective system to inspection, documentation and shipping.
How to choose a procedure
The customer often does not need to know immediately whether to request blasting, metallizing, wet painting or a combination of several steps. It is important to name what the part is supposed to withstand after modification, what documents will be needed and where the risk may arise.
The surface does not hold or is dirty
Corrosion, scale, old paint or an inappropriate surface profile can degrade other layers. Typically, blasting and follow-up are addressed before the next step.
Explore abrasive blastingLifetime in the environment is decisive
When the part is to withstand long-term outdoor or heavy duty use, we assess the pre-treatment, metallizing, coating system and measurement of the result.
Explore metallizingIt depends on appearance and repeatability
Shade, composition of layers, drying, final inspection and stable production process are important for visual parts, series or technical coating systems.
Show paintingThe joint shall not be formed by further drilling or welding
For technical assemblies, surface preparation, cleanliness, application, fixation, curing and a demonstrable process are decisive according to the requirements of the order.
Explore adhesive bondingThe part is part of an assembly
For welded or completed parts, it is necessary to coordinate preparation, production, inspection, surface protection and documentation into one follow-up procedure.
Explore weldingThe order is complicated by handling or completion
Fixtures, hanging, masking, assembly, packaging or shipping often decide whether a job will make it through production safely and repeatably.
Explore production operationsWhy one controlled process
For demanding industrial parts, it is not enough to choose the right coating, abrasive or joint. It is important that pre-treatment, handling, covering, metallizing, painting, bonding, inspection and dispatch follow each other. The less hand-offs between suppliers, the less room for delays, part damage or unclear liability.
The order does not need to travel unnecessarily between multiple suppliers just because each can only do one step.
When technologies follow each other in one operation, it is easier to keep the procedure, deadline, control and output documentation.
Blasting, metalizing, priming, painting, or assembly is planned per part, not per vendor boundary.
For technical contracts, repeatability, traceability, documentation and the ability to document the progress of the process are important.
14 m
length of part for wet painting
9
paint booths
3
separate blasting booths
4
drying and curing ovens
Surface treatments
The surface treatment starts even before the varnish. We assess the condition of the part, the required environment, the standard, the service life, the continuity of operations and the documents that the customer will need during the handover or audit.
Surface preparation
Removal of scales, corrosion or old coatings, unification of the surface and preparation of the part for the next technological step.
Anti-corrosion protection
Metal protective layer for parts where long-term durability in a harsh environment is important.
Final system
Wet painting of large parts, technically demanding orders and repeated B2B series with quality control and documentation.
Production operations
For many jobs, finishing is only part of the process. IMAKS can also deal with subsequent operations that help keep the part under control — from fixtures and handling to certified bonding and welding to assembly, final assembly, packaging and shipping.
A controlled bonding process for technically demanding joints, where surface preparation, cleanliness, fixation, curing and documentation are decisive.
Explore adhesive bondingFollow-up production operations for projects where qualification, control and follow-up to the next steps of the order are important.
Explore weldingSuspension, positioning, transport in operation and technical solutions for heavy, long or atypical parts.
Explore production operationsThe part can go through finishing, inspection, shipping protection and shipping without unnecessary transfer between suppliers.
More about job completionQuality control and documentation
For demanding industrial contracts, the ability to document the process is often decisive. That is why we deal with layer control, visual result, reports, certifications and documents for internal approval or customer audit.
View certifications and examsMeasurements and records
Inspection according to the requirements of the specific job, system and environment of use.
Laboratory and tests
Support for verification of quality, durability and compliance with the agreed procedure.
Supplier approval
Evidence for internal technical assessment, supplier qualification or audit.
Process traceability
Clear responsibilities, control points and documentation for demanding B2B projects.
How we proceed
In the beginning, a drawing, photograph, customer request, standard or description of the environment in which the part will work is often sufficient. Together we will verify which procedure makes sense and what needs to be added for the offer.
01
Drawing, photo, material, dimensions, number of pieces, required term and customer regulations available.
02
We will assess pretreatment, handling, technology, continuity of operations, inspection and documentation.
03
It can be a single service or a combination of blasting, metallizing, painting, bonding, welding and other operations.
04
The order goes through agreed steps in a sequence that reduces delays and the risk of errors between operations.
05
According to the order, visual inspection, measurements, tests, reports or other customer requirements are carried out.
06
We will prepare the part for shipment, complete the agreed documentation and help with the next steps of the project.
When are we a suitable partner
We are not the right choice for every single item or lowest price without technical requirements. We are suitable for companies that need a reliable process, documentation and long-term cooperation.
When handling, part length, secure hanging and process planning are critical.
When you need stable quality, deadline, repeatability and long-term solvable process.
When it is necessary to document certifications, measurements, reports or qualifications of the supplier.
When you need blasting, painting, bonding, welding, assembly or packaging, deal with the follow-up.
Frequently asked questions
No. Often it is enough to describe the part, the environment of use, the desired lifetime, the standard or the problem you need to solve. We can verify the appropriate procedure together.
When the steps follow each other technologically, when it is risky to transport a part between suppliers, or when you need clear responsibility for the result, deadline and documentation.
We can do both. Sometimes it makes sense to separately blast, paint or glue. Other times it is safer to design a combination of steps so that the engagement makes technical and business sense.
Ideally a drawing, photograph of the part, material, dimensions, weight, number of pieces, required term, environment of use and any standards or customer regulations. If something is missing, we will fill it in together.
Contact and inquiry
Send us a part, drawing, photo or problem description. We will help verify suitable technology, process continuity, capacity, deadline and documentation.
Technology and Process
Get in touch if you need to assess a suitable procedure, finish, standard, documentation or continuity of other operations.
Price and term
Send the drawing, photo, number of pieces, dimensions, material, required term and everything you already know about the technology or standard.
Miroslava Mertlová
Assistant to the manager / main sales contact
+420 770 609 096 m.mertlova@imaks.czSupplier qualification
Send requests for certifications, tests, reports or customer audits. We will verify which documents are relevant for your project.
Attach a drawing, photograph or technical specification. If you do not know some data, we will complete it together.
